HP Printer in Error State | Easy 4 Steps Solution

If you are a regular user of HP printer, then it is quite obvious that you will encounter a number of issues with your printer. The Printer in error state is one of the most common issues that are encountered by several HP printer users. However, you don’t need to fret about this issue as there are some effectual solutions to resolve this problem. Moreover, if you want a quick solution, then we suggest you to make a call at HP Support Phone Number and take proper remedies from experts.

Printer in error state is most common issue that generally appears when your system gets new update and that affect the working of connected printer. There are several other reasons behind the occurrence of this error are:

• Improperly connected USB cable
• Operating system is not responding as it should be
• Connection issue, whether its wireless, USB, Bluetooth or wireless
• Damaged or corrupted driver issue

If you are looking for some effective solutions to fix this issue, then give a try to given below-mentioned solutions.

Check the connections of printer and then try restarting the device

This is one of the easiest methods that you can try to resolve printer is error state issue. Ensure if there is a proper connection between your computer and printer. Also, make sure that the connection is working appropriately. Check whether the cable or network you are using for making connection doesn’t have any problem. If there is any issue, then you can try restarting the devices. By powering off and on your devices such as printer, router and computer mostly problems gets resolved.

Make sure there is paper loaded in a proper manner

Before giving a print to your HP printer makes sure you have enough paper loaded on the paper tray. To load paper, first turned off your printer then put some paper in proper manner. Now, turn on your printer again and wait for few minutes until your Printer get ready.

Hardware Self-Test

• In this, you try and print via hardware self-test with your HP printer
• This involves quickly opening and closing the cover of the printer five to six times. By doing so, you will get printed pages with lines on them.
• If you didn’t get printed page, then you will receive a message that says why your printer can’t be identified.

Unplugging the Cable and reinstalling software

In this you simply unplug the cables from both the ends and then again plug them. You can also try uninstalling and then again installing the driver software related to your printer.

Hopefully, after trying these measures, you can easily get rid of HP printer is in error state issue. However, if the issue still persists, then try calling at HP Support Phone Number and making connection with professionals. They will quickly resolve your issue within a matter of seconds.